Deepmind 12 – tuning check

A quick test to see if your filters are correctly tuned :

Call the default program (Prog + Compare)

Turn the DCO1 Saw and Square off.

Set the VCF Freq on 5

Set the VCF Res all way up (10)

Set the VCF KYBD all way up (10) too.

Now press 12 times on a key to hear each voice.

If The sound is the same you’re good.

Else go into Global / System Settings /Calibrate

Choose Calibrate Voices / Call VCF Fine (It’s a fast one)

When it’s finished, press Prog button and retry same Key 12 times –> it should be good now